PL-VF10R
Pipe and Cable Locator with Variable Frequencies, Li-Ion Batteries and a 10W Maximum Power Output
TECHNICAL SPECIFICATIONS
Additional information
| Transmitter Available Operating Frequencies | Range from 512Hz to 480kHz |
|---|---|
| Transmitter Indicators | AC load assistance measurement, relative ohms, voltage, live voltage output, current output, power level, frequency, mode, battery indication alert, low battery indicator audio/visual with modulated low battery warning transmitted to the receiver |
| Transmitter Load Matching | Automatic from 5 Ω to 25,000 Ω |
| Transmitter Output Power | 10 power settings Low & Medium Frequency Range: 0.2w to 10w High. Frequencies (above 44kHz) : 0.2 to 1w |
| Transmitter Power Source | Rechargeable 10.8 V, 10 amp-hour maintenance free Lithium Ion Battery |
| Transmitter Battery Life | 8-20 hours (depending on load, frequency, power setting) Intermittent: 40-60 hours |
| Transmitter Operating Temperature | -4° F to 133° F (-20° C to 55° C) |
| Transmitter Ingress Protection Rating | IP65 |
| Transmitter Dimensions | 16” x 6.32” x 6” (41 cm x 16 cm x 15 cm) |
| Transmitter Weight | 6 lbs (2.7 kg); D-cell: 8 lbs (3.6 kg) |
| Transmitter Country of Origin | United States of America |
| Transmitter Warranty | 1 Year warranty. 48 Month (4 Years) Warranty when registered at http://www.ssilocators.com/warranty-registration within 1 month of the date of purchase. |
| Receiver Operating Frequencies | 480kHz, 200kHz, 131kHz, 82.315kHz, 65.536kHz, 32.768kHz, 8.192kHz, 4.010kHz, 815Hz, 797Hz, 640Hz & 512Hz |
| Receiver Sonde | 640Hz, 512Hz, 815Hz, 8.192 kHz & 32.768kHz |
| Receiver Passive Power Modes | 50env & 60env, LiveSound TM; Radio Frequency; Rectified CP 50Hz & Rectified CP 60Hz |
| Receiver Antenna Mode | Simultaneous peak/null (dual horizontal antennas & vertical antenna), pin-point peak (dual horizontal antennas), directional guidance, peak (single horizontal antenna) & null (single vertical antenna) |
| Receiver Display | Indicators back-lit segmented LCD bar graph, battery condition, continuous mode signal strength, depth measurement, line orientation, left/right line guidance, operating mode, volume level & function indicators |
| Receiver Power Source | Lithium Ion rechargeable battery |
| Receiver Battery Life | Continuous 30h. – Intermittent 82h. |
| Receiver Signal Strength | LCD bar graph, absolute signal strength 0-999 |
| Receiver Gain Control | Left/ Right Guidance Mode: Automatic |
| Receiver All Other Locate Modes | Manual gain adjustment & automatic centering |
| Receiver Dynamic Range | 126 dB |
| Receiver Depth Measurement | 3 digit LCD readout of push-button measurement (1 inch – 30 feet) (.02m-10.6m) with accuracy > 5% of depth. (Digital measurement) |
| Receiver Operating Temperature | -4ºF to +133ºF (-20ºC to +55ºC) |
| Receiver Ingress Protection Rating | IP65 |
| Receiver Dimensions | 30.3” x 9.4” (77cm x 24cm) |
| Receiver Weight | 4 lbs (1.81 kg) |
Key Features
- Easy and simple one-hand operation; built-in handle
- Easy to learn; 3 keypad switches: on/off and volume, sensitivity up and sensitivity down
- Volume built into the on/off key; just hold down the key while it cycles through the settings
- The electronic keypad “clicks” when a key is depressed. A “real” speaker is in the front panel, providing outstanding volume.
- Microprocessor remembers the volume and gain settings from the last time the unit was on Non-metered (ML-1) and metered (ML-1M) versions are designed to look, feel and operate the same
- Strong aluminum monotube construction from the tip through the end of the handle and ABS injection-molded electronics case (3 ¼” tapered to 2 ½”-wide X 4 ½” tapered to 2 ½”-deep) provide the best structural integrity in a hand-held locator.
- Lightweight; only about two pounds including batteries
- Uses 2 regular alkaline 9-volt batteries, parallel; the unit is shipped with two spare batteries
- Soft pack carrying case included (optional hard case available) Battery compartment separated from electronic components and the circuit board. No exposing electronics to replace the batteries.