PL-TT
The dependable, affordable and rugged solution for the locating professional
TECHNICAL SPECIFICATIONS
Additional information
| Transmitter Available Operating Frequencies | Range from 12Hz to 200kHz |
|---|---|
| Transmitter Indicators | AC load assistance measurement, relative ohms, voltage, live voltage output, current output, power level, frequency, mode, battery indication alert, low battery indicator audio/visual with modulated low battery warning transmitted to the receiver |
| Transmitter Load Matching | Automatic from 5 Ω to 25,000 Ω |
| Transmitter Output Power | 3 power settings Low & Medium Frequency Range: 0.2w to 3w High |
| Transmitter Power Source | (8) “C” cell batteries |
| Transmitter Battery Life | Continuous: 8-15 hours (Dependant on load, frequency, power setting) |
| Transmitter Operating Temperature | -4° F to 133° F (-20° C to 55° C) |
| Transmitter Ingress Protection Rating | IP65 |
| Transmitter Dimensions | 8.5” x 5.8” x 2.5” (21 cm x 15 cm x 6 cm) |
| Transmitter Weight | C-cell: 2.2 lbs (1 kg) with batteries |
| Transmitter Country of Origin | United States of America |
| Transmitter Warranty | 1 Year warranty. 48 Month (4 Years) Warranty when registered at http://www.ssilocators.com/warranty-registration within 1 month of the date of purchase. |
| Receiver Operating Frequencies | Range from 512Hz to 131kHz |
| Receiver Passive Power Modes | 60Hz, CP |
| Receiver Antenna Mode | Peak & Left/Right |
| Receiver Display | Bar graph, low battery, signal strength,& mode |
| Receiver Power Source | (6) "AA" Alkaline batteries |
| Receiver Battery Life | Continuous: 30 hours; Intermittent: 60 hours |
| Receiver Signal Strength | Bar graph & Absolute signal strength 0-99 |
| Receiver Gain Control | Left/ Right Guidance Mode: Automatic |
| Receiver All Other Locate Modes | Manual gain adjustment |
| Receiver Dynamic Range | 126 dB |
| Receiver Depth Measurement | Push button digital depth & Triangulation |
| Receiver Operating Temperature | -4ºF to +133ºF (-20ºC to +55ºC) |
| Receiver Ingress Protection Rating | IP65 |
| Receiver Dimensions | 33.3” x 3.4” (77 cm x 24 cm) |
| Receiver Weight | 1.26 lbs (0.57 kg) with batteries |
Key Features
- Easy and simple one-hand operation; built-in handle
- Easy to learn; 3 keypad switches: on/off and volume, sensitivity up and sensitivity down
- Volume built into the on/off key; just hold down the key while it cycles through the settings
- The electronic keypad “clicks” when a key is depressed. A “real” speaker is in the front panel, providing outstanding volume.
- Microprocessor remembers the volume and gain settings from the last time the unit was on Non-metered (ML-1) and metered (ML-1M) versions are designed to look, feel and operate the same
- Strong aluminum monotube construction from the tip through the end of the handle and ABS injection-molded electronics case (3 ¼” tapered to 2 ½”-wide X 4 ½” tapered to 2 ½”-deep) provide the best structural integrity in a hand-held locator.
- Lightweight; only about two pounds including batteries
- Uses 2 regular alkaline 9-volt batteries, parallel; the unit is shipped with two spare batteries
- Soft pack carrying case included (optional hard case available) Battery compartment separated from electronic components and the circuit board. No exposing electronics to replace the batteries.