Product Features

• Extremely easy to learn and use
• "Peak Over" the target line.
• 50/60 Hz Power Line detection
• Analog Meter on Transmitter
• Analog Meter on Receiver
• Depth Measurement
• 500-800' approximate range Inductive
• 2,000' approximate range Conductive
• 6 D cell batteries - Transmitter
• 6 AA batteries - Receiver
• Battery condition check
• Traces ANY continuous metal such as iron, steel, and copper water lines, gas lines, tracer wire by plastic pipe, telephone/tv cables, copper and aluminum wire, conduit, an power lines energized or not (be careful with power lines!)

View PL-920 Brochure

The PL-2000 Pipe and Cable Locator offers a new approach in high power, low frequency locating. With three active frequencies, two passive frequencies, four modes of operation, and both inductive and direct connection capabilities, the PL-2000 is powerful and versatile, but still surprisingly easy to use and cost effective.

Product Features

• Transmitter offers three watts power output in the Direct Connection operating mode; allowing locates for much longer distances.
• The lightweight, balanced receiver, offers four different operating modes
  • "Peak" mode, for the most accurate locates and for depth measurement
  • "Null" mode, for fast, easy tracking (also indicates "left" or "right")
  • "Dist" mode, for even longer distances - up to 1 1/2 times
  • "Sonde" mode (8 kHz and 512 Hz), for locating sewer Sondes and measuring their depths
• Three "active" frequencies at a nominal 512 Hz, 8kHz, and 27 kHz, plus two "passive" frequencies at the 50/60 cycle flowing AC current, and Radio in the 14 kHz - 25 kHz ranges
• Select the "Mix" mode at the transmitter and transmit all active frequencies simultaneously in the "Direct Connect" mode.
• Detects and reports "poor ground" conductivity at the transmitter in Direct Connection
• Current measurement in the "Depth" function can verify you are tracing the correct line in congested utilities
• "Auto Off" functions in both the transmitter & receiver shut off their operations after a user defined time period of non-use
• Padded carrying case
• 3 year warranty

View PL-2000 Brochure

Direct Inductive Clamp

• Induce signal directly onto target line through insulation, paint, etc. - up to 4" diameter

Sonde (mini-transmitter)

• 8 kHz - Flush, push, pull through non-metallic pipe - works with PL-2000 receiver
• Traces through sewer pipe, water lines, etc. that are plastic, concrete, vinyl, clay, etc.
• Self-contained - on/off toggle switch, indicator LED, lanyard attach loop & threaded to receive plumber's snake