PL-2000 Pipe and Cable Locator

• Transmitter offers three watts power output in the Direct Connection operating mode; allowing locates for much longer distances.
  
• The lightweight, balanced receiver, offers four different operating modes
  
  • "Peak" mode, for the most accurate locates and for depth measurement
  • "Null" mode, for fast, easy tracking (also indicates "left" or "right")
    
  • "Dist" mode, for even longer distances - up to 1 1/2 times
    
  • "Sonde" mode (8 kHz and 512 Hz), for locating sewer Sondes and measuring their depths
    
• Three "active" frequencies at a nominal 512 Hz, 8kHz, and 27 kHz, plus two "passive" frequencies at the 50/60 cycle flowing AC current, and Radio in the 14 kHz - 25 kHz ranges
  
• Select the "Mix" mode at the transmitter and transmit all active frequencies simultaneously in the "Direct Connect" mode.
  
• Detects and reports "poor ground" conductivity at the transmitter in Direct Connection
  
• Current measurement in the "Depth" function can verify you are tracing the correct line in congested utilities
  
• "Auto Off" functions in both the transmitter & receiver shut off their operations after a user defined time period of non-use
  
• Padded carrying case

INCLUDES A 3 YEAR WARRANTY
(our competitors only offer 1 year)

View PL-2000 Brochure

Optional Equipment for PL-2000:

Direct Inductive Clamp
- Induce signal directly onto target line through insulation, paint, etc. - up to 4" diameter

Sonde (mini-transmitter)
- 8 kHz - Flush, push, pull through non-metallic pipe - works with PL-2000 receiver
- Traces through sewer pipe, water lines, etc. that are plastic, concrete, vinyl, clay, etc.
- Self-contained - on/off toggle switch, indicator LED, lanyard attach loop & threaded to receive plumber's snake